User manual

17SPEKTRUM DX20 • TRANSMITTER INSTRUCTION MANUAL
EN
Flight Mode Wizard
The Flight Mode Wizard resets the Flight Mode Table to the default
settings without affecting the flight mode switch assignments.
To reset the Flight Mode Table:
1.SelectPREVIOUSuntilyoureachtheFlightModeWizard.
2. Select the desired option, based on the number of active flight
modes. The Flight Mode Table is now reset.
Aircraft Flight Mode Setup
Youcanassignupto5ightmodesusinganycombinationofup
to two switches. You can also assign a priority switch. When the
priority switch position is active, only the current flight mode is
active, regardless of other switch positions.
Model Name enables you to assign a custom name to the current
model memory. Model names can include up to 20 characters,
including spaces.
To add letters to a Model Name:
1. Scroll to the desired letter position and press the scroll wheel
once.Aashingboxappears.
2.Scrollleftorrightuntilthedesiredcharacterappears.Press
the scroll wheel once to save the character.
3.Scrolltothenextdesiredletterposition.RepeatSteps1and
2 until the Model Name is complete. Insert a character by
selecting <+> or delete a character by selecting <->.
4. Select BACK to return to the System Setup list.
To erase a character:
1.PressCLEAR while the character is selected.
2.PressCLEAR a second time to erase all characters to the right
of the cursor.
Aircraft Type

This menu only available in Airplane Mode. See ACRO(Airplane)sectionforsetup.
Sailplane Type

This menu only available in Sailplane Mode. See SAIL(Sailplane)sectionforsetup.
Swash Type

This menu only available in Helicopter Mode. See HELI(Helicopter)sectionforsetup.
Aircraft Options

This menu only available in Multirotor Mode. See MULTI(Multirotor)sectionforsetup.
SYSTEM SETUP
Model Name
F-Mode Setup
Mode Number of Switches Number of Flight Modes
ACRO 2 5
HELI 3 (including Throttle Hold) 5 (including Throttle Hold)
SAIL 3 10
MULTI 2 5
Use the Flight Mode Setup menu to assign switches to flight
modes. You can assign up to ten flight modes using any
combination of up to three switches depending on model type.