Manualshelf

Instruction Manual

ManualsBrandsSpektrum ManualsElectronicsDX6e Transmitter
21222324252627282930
24 SPEKTRUM DX6e • TRANSMITTER INSTRUCTION MANUAL
EN
The Serial Number screen displays the transmitter serial number and AirWare software version.
Reference the Serial Number screen any time you need to register your transmitter or update the AirWare software from the Spektrum
Community website.
The transmitter Spektrum AirWare software version appears
between PREV and NEXT at the bottom of the Serial Number
screen. Register your DX6e to get Spektrum AirWare software
updates and other news at spektrumrc.com
IMPORTANT: Spektrum AirWare fi les are specifi c to the
transmitter serial number and you cannot transfer Spektrum
AirWare fi les between transmitters, ie., downloading an Spektrum
AirWare software update once and attempting to install it on
multiple transmitters.
CALIBRATE
Calibrating the Transmitter
1. Carefully move the gimbal sticks in a + shape moving from left
to right, then up and down. Press gently on the gimbals at the
stops to achieve an accurate calibration. Return both gimbal
sticks to the center position.
2. Select SAVE to store the calibration.
Serial Number
Exporting the Serial Number to the SD Card
You may fi nd it helpful to export the transmitter serial number to a
text fi le for your personal records or when you are registering the
transmitter on the Spektrum Community.
To export the transmitter serial number:
1. Insert an SD Card in the card slot on the transmitter.
2. Scroll to EXPORT and press the scroll wheel. The SD Status
screen appears and should display MY_DX6e.xml in the
middle of the screen.
3. Press the scroll wheel again to return to the Serial Number
screen.
4. Power off the transmitter and remove the SD Card from the
transmitter.
5. Install the SD Card in a card reader connected to your
computer.
6. Open the MY_DX6e.xml fi le from the SD Card location. You
can then copy and paste the serial number into your personal
records or to the Spektrum Community website.
SYSTEM SETUP
Locating the Transmitter Spektrum AirWare Software Version
The Calibration screen stores the potentiometer endpoints for all proportional controls. It is mandatory to complete the calibration after
changing the stick mode selection.