Instruction Manual

16 SPEKTRUM DX6e • TRANSMITTER INSTRUCTION MANUAL
EN
Flight Mode Name Setup
The Flight Modes Name function allows the fl ight modes to be
renamed throughout the menus.
To change the Flight Mode name:
1. Enter the Flight Mode Names function after setting up the fl ight
modes.
2. Select the fl ight mode you want to rename, and enter the name
as desired.
3. Press back in the Edit Flight Mode Name screen to return to the
main Flight Mode Names screen.
Channel Assignment
The Channel Assignment function allows you to reassign almost
any receiver channel to a different transmitter channel. For
example, the receiver gear channel could be re-assigned to the
transmitter throttle channel.
1. Scroll to the receiver channel you wish to change.
2. Press the scroll wheel once and scroll left or right to change
the receiver input selection.
3. Press the scroll wheel a second time to save the selection.
IMPORTANT: You cannot assign a mix to a channel that has been
moved. Create the mix fi rst, then move the channel.
Channel Input Confi guration
The Channel Input Confi guration screen enables you to assign a
transmitter channel to a different control stick or switch.
1. Select NEXT on the RX Port Assignments screen to access the
Channel Input Confi guration screen.
2. Scroll to the transmitter channel you wish to re-assign and
press the scroll wheel. The box around the current input
selection fl ashes.
3. Scroll left or right to select the desired control stick or switch.
4. Press the scroll wheel to save the selection.
SYSTEM SETUP