iX12 Manual

REVERSE
Use the Reverse menu to reverse the travel direction of any channel.
For example, if the elevator moves up and it should move down, reverse the
elevator channel travel direction.
To reverse a channel travel direction:
1. Select Reverse in the Servo Setup menu ribbon.
2. Touch the button next to the channel you wish to reverse.
If the throttle channel is reversed, a confirmation screen appears. Select
YES to reverse the channel. A second screen appears, reminding to re-bind
the transmitter to the receiver, at low throttle, to re-set the throttle failsafe.
CAUTION: Always rebind the transmitter and receiver after reversing
the Throttle channel. Failure to do so will result in the throttle moving to
full throttle if failsafe activates.
Always perform a control test after making adjustments to confirm the model
responds properly.
TOC