iX12 Manual
SERVO SETUP
From the Model Adjust menu, touch
Servo Setup. The following setup sub
menus are available:
•Reverse
•Travel
•Sub Trim
•Speed
•Absolute Travel
•Balance
Touch the desired function in the ribbon
at the top of the screen to bring up the
corresponding setup sub menu.
Touch and drag on any of the sub menus
to scroll through the channel lists.
The Model Adjust menu can be accessed
at any time from the Servo Setup sub
menus by touching the back arrow ( ) .
CAUTION: After adjusting the
servo setup, always rebind the
transmitter and receiver to set the
failsafe position.