iX12 Manual

CHANGE THE THROTTLE RATCHET
1. Locate the throttle strap adjustment screws on both gimbals. The ratchet set
screw engages a serrated section on the gimbal for a ratcheted throttle, while
the tension set screw engages a strap for smooth tension on the gimbal.
2. To engage the throttle ratchet, using a small Phillips screwdriver, turn the
ratchet set screw clockwise until the ratchet engages.
3. To disengage the throttle ratchet, using a small Phillips screwdriver, turn
the screw counterclockwise until the gimbal moves freely.
Ratchet
set screws
Tension
set screws
TOC