iX12 Manual

PHYSICAL TRANSMITTER ADJUSTMENTS
The adjustment points for the iX12 are located around the face of each
gimbal.* This arrangement allows for quick and easy adjustment without
removing the back cover.
Available adjustments:
•Mode Change
•Throttle Ratchet
•Throttle Tension
•Stick Tension
*The gimbal adjustment screws are covered by small rubber plugs, and the throttle
limit switches are covered by small plastic caps. Carefully remove these covers prior
to making adjustments. The rubber plugs are not interchangeable. Ensure to note
where each plug is removed from and replace them accordingly.
TOC