iX12 Manual

assigned to the camera pan and tilt commands. In this example, the pilot
uses the first two flight modes to fly the aircraft. In those modes, the camera
pan and tilt can be assigned to the sliders. In the third flight mode, the
aircraft can take advantage of GPS technology* to hold a position and the
pilot can move the pitch/roll control stick to guide the camera gimbal without
affecting the multirotor.
*GPS technology for position hold are not part of the features of the iX12. This
function must be installed on the flight controller onboard the aircraft.
WARNING: AP mode includes complicated channel assignment
capabilities. Confirm operation works as expected with the motors
disengaged before experimenting in flight.
TOC