iX12 Manual

Rotor type
Select the number of rotors on the multirotor.
Camera
Select the number of movement axes on the camera gimbal.
FPV Racer
This selection selects FPV Racer mode or AP mode. When FPV Racer mode is
not enabled, multirotor models are in AP mode.
•FPV Racer mode optimizes the throttle channel by changing it to 11ms
operation and keeps flight mode functions simple.
•AP mode includes a seperate Channel Input Assignment menu tied to each
flight mode. With this capability a pilot can configure the iX12 in AP mode
so changing the flight mode can change the input source for the camera
gimbal. For example, a pilot can configure flight mode 1 for slow speed
flight, flight mode 2 for faster flying and flight mode 3 to put the multirotor
into a position hold mode. The pitch/roll control stick can then be re-