iX12 Manual

Choosing from the common configurations in this menu opens access to
other menus not shown otherwise. Flaps, for example, can be assigned to a
switch and made to function without using one of the pre-configured options.
However, by assigning the correct wing type in the Aircraft Type menu, a Flap
System menu is enabled in the Model Adjust list. The Flap System menu
gives the pilot the choice of switches and a built-in elevator compensation
mix, which makes fine-tuning an airplane for level flight throughout the flap
range much easier. Options that enable mixes will label the default assigned
channels in other menus, such as Servo Setup and Monitor.
In menus options, select an on-screen diagram that matches the control
layout on the aircraft.
TOC