iX12 Manual

To add a servo output model start warning:
1. From Model Setup, touch
Model Start Warnings.
2. Select the SERVO OUTPUT trigger
type.
3. Touch the + icon to add a new
warning. Touch the ( ), if
available, to remove a current
warning.
4. Select the desired output channel
from the first drop down button.
5. Select Over or Under from the next drop down button to define which side
of the given output position the warning will trigger.
6. Define the trigger point value. Values from -100 to 100 may be entered.
7. Select the type of warning and enter text-to-speech if Voice is selected.