iX12 Manual

6. Select the Input Channel from the trainer that controls the selected

output channel when trainer is activated. The Focal V2 and DVR have

pan on Channel 18, for example; with these headsets the pilot selects

channel 18 as the input channel for pan control. Refer to the Focal Channel

Assignments table for a list of channel functions.

7. Input channels can be reversed or scaled in this menu to conﬁgure the

student controls for correct response on the output channels. Normal servo

setup menus for the output channel will be ignored when the trainer signal

is commanding a given channel.

8. Repeat steps 4–7 to conﬁgure all the required output channels; select

the Output Channel ﬁrst, change the mode to Student, select the Input

Channel and scale and reverse the travel as necessary.

9. For wireless connections, touch the Bind button to put the iX12 into trainer

bind mode before powering on the wireless head tracker (student transmitter).

See the Binding Wireless Trainer section for more information.

TOC