iX12 Manual

INSTRUCTOR TRANSMITTER CONFIGURATION
1. Select the type of trainer mode for the application (Wired or Wireless,
Programmable Instructor or Pilot Link Instructor).
2. Choose whether or not to enable Instructor Over-Ride. This setting
defines how the instructor can resume control from the student. When
enabled, the instructor must not move the sticks when the student is given
control. Moving the sticks or moving the selected trainer switch will return
control to the instructor.
With Instructor Over-Ride disabled, the switch position determines who is
in control.
When Switch I or the right or left trim button is selected, Instructor Over-
Ride is disabled by default. When any other switch is selected, Instructor
Over-Ride is enabled.
TOC