iX12 Manual

CHANNEL INPUT CONFIGURATION
In the Channel Input Configuration menu, all
but the primary flight controls are available
for assignment, indicated by a drop down
menu button next to each channel.*
1. Touch the drop down button next to the
channel to open a switch selection menu.
2. Select the desired input device. A
single input device can be assigned to
multiple channels.
* The primary flight controls are available for assignment when a multirotor model type,
with the FPV Racer option off, is active. In this case, the channel input configuration
is dependent upon the flight mode switch position, allowing one flight mode to have
normal primary controls while another flight mode may, for example, release the throttle
stick to be used as tilt control for a camera gimbal.
TOC