iX12 Manual

USING SPEKTRUM TELEMETRY
It is possible to either let the iX12 automatically configure the telemetry
sensors, or set up each sensor manually. Receiver voltage always defaults to
the eleventh slot, and flight log data to the twelfth.
To configure the telemtry system:
1. Install and connect the telemetry sensors to a compatible Spektrum
telemetry receiver or module according to the instructions included with
the sensors and receiver/module.
2. Bind the receiver to the iX12.
3. Configure the connected sensors.
To let the iX12 determine the connected sensors: Touch the Auto-Config
button. The model must be bound, powered on and sensors all connected.
To manually enter the connected sensors: Select the desired telemetry
slot. Select the relevant sensor from the popup, scrollable list. After
selecting a sensor, the sub-menu for that sensor will open.