iX12 Manual

5. Select Stopwatch or Countdown.

Stopwatch: counts up from zero at start.

Countdown: counts down from a user deﬁned time at start.

6. If Countdown is selected, the start time (Minutes and Seconds) can be

changed. The default setting is 5 minutes.

7. Touch the Switch selection button. If an analog input device is selected, touch

the Over Under selection button. Over Under deﬁnes if the timer is running

when the input device is over or

under the Trigger value. Touch the

Trigger selection button to set the

trigger value. For example, Throttle

Stick is the default switch for Acro

and is set to trigger when the throttle

is over 25%. Moving throttle below

25% will stop the timer.