iX12 Manual

GYRO
Gyro options for Heli and Acro model types are considerably different.
HELI GYRO
The Gyro menu is enabled to manage tail gyro gain when the Model Type is
set to Helicopter.
Touch Switch to select a switch or On.
The number of gyro gain positions will
correlate to the switch chosen. If On
is selected, only one position is set.
Select a channel to assign to the gain;
this is the channel the gain signal from
the gyro needs to be plugged into on
the receiver. Most gyros will use one
side of gain channel for heading hold and the opposite side for rate mode.
Consult the gyro manual for more information.
TOC