iX12 Manual

A pitch curve is also available for Acro models. The Acro pitch curve operates
in the same manner as the helicopter pitch curve, but can be assigned to any
stick, switch, or flight mode.
To activate the Acro pitch curve:
1. From Model Setup, touch Aircraft Type.
2. Touch and sweep up to scroll to the bottom of the menu.
3. Touch Extra Options.
4. Activate Pitch Curve.
5. Touch the back arrow ( ) to return to Model Setup.
6. Touch Channel Assign.
7. Touch RX PORT ASSIGNMENT.
8. Assign the pitch output by selecting an open receiver port and choosing
Pitch from the popup list.
9. From Model Adjust, touch Pitch Curve. Assign a switch and program the
pitch curve using the same steps as the heli programming above.
TOC