iX12 Manual

To adjust the V-tail differential:
1. From the Model Adjust menu, touch V-Tail Differential.
2. Set Switch to On to use a single value for differential, or assign a switch
from the popup menu.
3. Touch the value box to adjust
the differential value. A positive
differential value decreases the
amount of down travel of both tail
surfaces. A negative differential
value decreases the amount of
up travel of both tail surfaces. A
setting of 100 eliminates down
travel entirely. A setting of –100 eliminates up travel. Selecting 50 or –50
reduces the down or up travel by half.
4. When the value is set, touch OK to save the setting.
TOC