iX12 Manual

To conﬁgure the AS3X functions:

1. Conﬁgure the receiver for remote gain using the AS3X application.

In the receiver conﬁguration, each axis under every ﬂight mode must be set

to RELATIVE (REL) to connect that gain value to the remote gain channel.

Leaving gain settings as ABSOLUTE (ABS) during the setup will mean the

gain values are ﬁxed and will not be affected by the remote gain channel.

2. With the aircraft powered on and bound to the iX12, enter the Telemetry

menu in Model Setup and select Auto-Conﬁg to set up the telemetry to

work with AS3X.

3. From Model Adjust, enter the AS3X menu. This menu is scrollable by

touching and dragging up or down to show additional information.

4. If not already done in the Flight Mode menu, assign Switch to the desired

switch.

5. Select the appropriate gain channel to match the assignment during the

receiver setup.