iX12 Manual

The AS3X Gains menu displays the following for each flight mode:
Axis
Rate: Rate gain values
Heading: Heading gain values
Actual: The current gain value taking into account the priority gain and the
stick position of that channel
Gain: Represents the gain channel output position. This number is the
percentage of the preset gain the receiver is using. 100 will pass
through the full gain setting, 50 in this value would mean the receiver
is using 50% of the gains set in the receiver configuration. The Gains
value affects all axis, heading hold and rate gains that are assigned as
RELATIVE. This value can only reduce the gain from the value set in the
receiver configuration, it cannot raise the gain above the preset value.
Input: Allows the selection of either the L or R Trim switches to adjust the gain.