iX12 Manual

Two built-in sequencers are set up for different styles of gear doors. A third
sequencer is left open for any application.
•Door Cycle/Wheels: for P-51 style gear doors where the gear doors open
first, the retractable landing gear cycles in or out, and the door closes.
•Door Basic/Wheels: for gear door systems that require the door to stay open
with the landing gear.
These values are only meant to serve as a baseline and are defaults, but any
of the three sequences can be re-named and fully reconfigured.
The total time for the sequence is shown along the horizontal axis of the
graph. The output channel position is shown on the vertical axis. The vertical
axis is scaled from -100 to 100 based on the travel adjustment set in the
servo setup menu. Each channel has its own independent timeline.