iX12 Manual

Flap to Elevator (FLP > ELE)
Flap to Elevator mix prevents pitch up tendency that occurs when Crow or
Butterfly mixing is applied. This mix is typically used only with the Camber
System. The Flap to Elevator mix operates as a curve so the elevator response
can be matched to specific points in the spoiler stick travel. This enables the
pilot to ensure the elevator compensation is correct throughout the flap range.
For sailplanes with ailerons/tips/flaps, ensure an appropriate Sailplane Type is
selected in Model Setup so that tips appear in the transmitter as RAIL and LAIL.
Decrease or increase travel on the tip ailerons by creating an AIL > RAIL mix.
TOC