iX12 Airware Change Log

 In Servo Setup - Speed, the right and left directions adjust the speed in that
proper direction regardless of the servo reversing position
 In screens where the keyboard is available, the Cap lock defaults are now
consistent.
 Battery transmitter voltage now displays in 1/10 volt increments at 4.0V.
 Model Timers now correctly trigger when reassigned to various switches and
buttons.
 The Inactivity Alarm is no longer active when using other applications.
 Analog Switch setup now resets values correctly
 In the Model Start Alerts Servo Output screen all switch and stick options are
now available
 When switching models, un-commanded random audio warnings no longer occur
 After setting up a Startup Warning, the system will now allow that model to be
stored as a template
 In the Preflight Checklist, the option of Per Session now properly causes the
checklist to activate only when the system is first powered on or a new model is
selected and the RF is activated
 TBS Crossfire now properly turns on/ off during all phases including during
charging
 Model Reset now resets the Model Name
 The startup tone now occurs when the Airware Application is up and ready to use
 When changing languages from another language back to English, the text for
the TX battery and Inactivity alarms returns to English
 Telemetry RPM Macros now properly announce the RPM value