DX6e Manual

17SPEKTRUM DX6e • TRANSMITTER INSTRUCTION MANUAL
EN
Flight Mode Name Setup
The Flight Modes Name function allows the flight modes to be
renamed throughout the menus.
To change the Flight Mode name:
1. Enter the Flight Mode Names function after setting up the flight
modes.
2. Select the flight mode you want to rename, and enter the name
as desired.
3. Press back in the Edit Flight Mode Name screen to return to the
main Flight Mode Names screen.
Channel Assignment
The Channel Assignment function allows you to reassign almost
any receiver channel to a different transmitter channel. For
example,thereceivergearchannelcouldbere-assignedtothe
transmitter throttle channel.
1. Scroll to the receiver channel you wish to change.
2. Press the scroll wheel once and scroll left or right to change
the receiver input selection.
3. Press the scroll wheel a second time to save the selection.
IMPORTANT:Youcannotassignamixtoachannelthathasbeen
moved.Createthemixrst,thenmovethechannel.
Channel Input Configuration
The Channel Input Configuration screen enables you to assign a
transmitter channel to a different control stick or switch.
1. Select NEXT on the RX Port Assignments screen to access the
Channel Input Configuration screen.
2. Scroll to the transmitter channel you wish to re-assign and
pressthescrollwheel.Theboxaroundthecurrentinput
selection flashes.
3. Scroll left or right to select the desired control stick or switch.
4. Press the scroll wheel to save the selection.
SYSTEM SETUP