Spektrum S2100 Dual Port Charger Manual

5
EN
System Setting Menu
Charge Screen
Optional Parts
Charger Errors
From the home screen, press and hold the menu button to access
the System Settings menu.
CH1-SMART Con gure the settings on your SMART battery
CH2-SMART Con gure the settings on your SMART battery
Backlight Low, Medium, High
Touch Sensitivity Low, High
USB Charge On, Off
Volume Off, Low, Middle, High
Completion Tone Single or repeat
Split Display Manual or Automatic
Language Select language
System Information Check the system information
System Self-Checking
Initiates a charger self-check. Do not connect a
battery to the output port while self-check is running
Back Return to the home screen
Operating Time
Percentage of
Full Charge
Capacity
Charged
Active Charging Current
Background Screen
(color indicates
charge cycle)
Battery Type
and Active Task
Battery
Information
Screen
(cell voltage shown)
Part # Description
SPMXCA507 IC5 Device to IC3 Battery 4” / 100mm; 10 AWG
SPMXCA310 IC3 Device to JST Device
SPMXCA309 IC3 Device to JST PH2.0 Device
Part # Description
SPMXCA307
IC3 Battery Parallel Y-Harness 6” / 150mm;
13 AWG
SMART Settings
Auto Storage
Select an Auto Storage cycle of between
12 and 240 hours
Storage Voltage
Select the storage voltage for each
cell
Charge Current
Change the default charge current for
your SMART battery
Charge Voltage
Select the charge voltage for your
SMART battery
Exception Record
Provides a list of exceptions, including
over-voltage, under-voltage or over-
temperature, and the date of exception.
Back Return to the home screen
The SMART selection is available if a SMART smart battery is
connected. SMART settings include:
If the charger displays an error, follow the on-screen prompts to remedy the error. If necessary, disconnect the battery from the output and
balance ports, disconnect the power supply, and restart the charger.