Spektrum Smart S150 ACDC Charger Manual

Operating the Charger

Charging requires the selection of two settings; battery type and charge

current. SMART batteries will automatically load the correct battery type and will

only allow current adjustments.

1. Connect the battery power connector and

balance connector to the charger.

Lithium battery balance connectors must

be inserted with the connector shifted

toward the center of the charger, as shown.

2. Quickly press and release the button to

adjust the current.

3. Press and hold the button for several seconds to change the battery type. This

function will not change the battery type when a SMART battery is connected.

4. Lithium batteries will being charging automatically after 5 seconds. The charge

rate can be changed during the charge with a quick press and release of the

button. Charging will restart after 5 seconds.

5. NiMH batteries will begin charging after a manual double press of the button

after mode and charge rate selections are made. The charge rate can be

changed during the charge with a quick press and release of the button. To

restart charging rapidly double click the button.