Spektrum FC6250HX Manual

EN
4
Installation
1. Mount the FC6250HX  ight controller with the servo connector block facing
either forward or aft. The side of the FC2650HX facing the main rotor disc
must be parallel to the rotor disc.
2. Use the included mounting tape (SPMA3032) to mount the FC6250HX  ight
controller to the airframe.
Connections (Servo and ESC)
Normal Con guration
Red, green, blue rapid blinking Initialization complete
Slow green strobe Normal operation
Slow red strobe Failsafe
Rapid red  ash when exiting
forward programming
Throttle not low; not in Normal/Hold
Slow blue strobe Forward programming mode
LED Indications
RX1
RX2
Throttle/
ESC
Aux1 or
Additional Power
Servo
A
Servo
B
Servo
C
Tail
Rotor
Servo