S1400 G2 Smart Charger Manual

Charger Errors

Backlight Low, Medium, High

Volume Off, Low, Middle, High

Completion Tone Single or Repeat

Touch Sensitivity Low, High

Language Select language

System Self-Checking Initiates a charger self check. Do not connect a battery to the output port while self check is running.

System Information View the charger’s ﬁrmware version

Back Return to the home screen

Smart Settings

Auto Storage Select to run Auto Storage function with a delay between 12 and 240 hours

Charge Current Change the default charge current for your Smart battery

Charge Voltage Select the charge voltage for your Smart battery

Storage Voltage Select the storage voltage for each cell

Battery History Provides number of battery cycles, battery temp and production date.

Fault Log Provides a list of faults, including over-voltage, under-voltage or over-temperature, and the date of exception.

Back Return to the home screen

The Smart selection is available if a Smart battery is connected. Smart settings include:

If the charger displays an error, follow the on-screen prompts to remedy the error. If necessary, disconnect the battery from the output and

balance ports, disconnect the power supply, and restart the charger.

* Visit the S1400 Smart Charger’s product page on www.horizonhobby.com for more information about the charger, ﬁrmware updates and

optional accessories.

System Settings