Installation Manual

ManualsBrandsSpeedTech Lights ManualsAutomotiveSuper Take Down Raptor TIR Interior Upper Windshield Split LED Visor Light Bar for Emergency Vehicle Warning Visor Lights - Amber/Clear Alternating - Clear

RAPTOR

SUPER TD

VISOR LIGHT BAR

including but not limited to photocopying, recording, electronic delivery, .PDF reproduction, or any other means of reproducing all or any part hereof without

the express prior written consent of SpeedTech Lights, Inc, except for non-commercial purposes as permitted by United States copyright law. Customers

of SpeedTech Lights, Inc, may download and print this Instruction Manual for use with products sold to the customer by SpeedTech Lights, Inc. However,

no part of this Instruction Manual may be otherwise or subsequently reproduced, downloaded, disseminated, published, or transferred, in any form or by

any means, except with the prior written consent of SpeedTech Lights, Inc.

Flash Pattern List

• Steady Burn

• Steady Burn Left Side. Quad Flash Right Side 120 FPM

• Steady Burn Right Side. Quad Flash Left Side 120 FPM

• Double Flash Alternating 180 FPM

• Double Flash Front/Back 210 FPM

• Triple Flash 75 FPM

• Double Flash Left/Right 210 FPM

• Double Flash 2 In/2 Out

• Double Flash Alternating

• Quad Flash 60 FPM

• Quad Flash 90 FPM

• Single Flash Left/Right 210 FPM

• Back to Front Sweep

• Single Flash Alternating 120 FPM

• Single Flash 75 FPM

• Single Flash 60 FPM

• Single Flash 150 FPM

• Single Flash Alternating 300 FPM

• Single Flash Alternating 270 FPM

• Single Flash 180 FPM

• Single Flash 90 FPM

• Variable Speed Left/Right

• Slow Back to Front Sweep

• Variable Speed Alternating

• Variable Speed

• Left/Right Double Time

• Clockwise/Counter Clockwise Sweep

• Clockwise Sweep

• Counter Clockwise Sweep

• Fast Clockwise Sweep

• Fast Counter Clockwise Sweep

• Random

Flash Pattern Shortcuts

• Hold ash pattern toggle/cable for 3 seconds to toggle Steady Burn mode.

• Hold ash pattern toggle/cable for 5 seconds to toggle Random pattern mode.

About Flash Patterns

• All STL LED products are equipped with a non-volatile memory which will recall the last ash pattern when the Light Bar is turned on.

• Set the ash pattern by pushing the Flash Pattern button on the Grand Control Box to cycle through the various patterns.

• If you are not using the Grand Control Box, follow the wiring diagram to identify the Flash Pattern wire to manually cycle through patterns.