Installation Manual
Base Bracket
Visor Bracket
7 SpeedTech Lights, Inc © 2019
RAPTOR
®
SUPER TD
VISOR LIGHT BAR
Raptor Mounting Bracket Installation
Base Bracket and Universal Visor Bracket Assembly
To attach the base bracket and visor bracket, you will need the following for each of the 4 assemblies:
• (2) Phillips pan head screws
• (4) Flat washers
• (2) Split lock washers
• (2) Hex nuts
1. Take both brackets and overlap the openings.
2. Insert (2) Phillips pan head screws through the base
bracket opening.
3. On the other end, insert (2) at washers, (2) split lock
washers, and (2) hex nuts to secure.
NOTE: Do not fully tighten at this point as adjusting
will need to be done.
4. Repeat Steps 1 - 3 for each assembly. There will be a
total of 4 assemblies.