Installation Manual

K-FORCE

MINI LIGHT BAR

Magnet Mounts (Included)

• This unit comes included with magnetic mounting brackets pre-attached.

• Magnet brackets are adjustable along the length of the aluminum track.

• Ensure all four magnets are secured to a at surface.

Stud Mounts (Sold Separately)

• Loosen the hardware securing the Magnet Mounts to your Light Bar

and remove the Magnet Mounts from the Light Bar.

• Place your main mounting bolt through the Stud Mount.

• Use the screws that were securing each Magnet Mount to the Light

Bar and attach the Stud Mounts to the Light Bar.

• Fully tighten the hardware to secure the Stud Mounts to the Light Bar.

• NOTE: Not all bolts used to secure Magnet Mounts will be used for

securing Stud Mounts as pictured on the right.

Headache Rack Mount (Sold Separately)

• Loosen the hardware securing the Magnet Mounts to your Light Bar

and remove the Magnet Mounts from the Light Bar.

• Use the screws that were securing each Magnet Mount to the Light

Bar and attach the Headache Rack Bracket to the Light Bar using the

two vertical cutaways on the Headache Rack Mount. This secures the

Headache Rack Mount to the Light Bar.

• The Headache Rack Mount may then be directly mounted. Or, by

using the supplied secondary piece, you may “sandwich” your back

rack with 2 user supplied nuts and bolts.

• NOTE: Not all bolts used to secure Magnet Mounts will be used for

securing Headache Rack Mount as pictured on the right.