Installation Manual
5 SpeedTech Lights, Inc © 2019
DOME
®
BEACON
Flash Pattern List
• Single Flash 75 FPM Phase 1 – Sync*
• Single Flash 75 FPM Phase 2 – Sync*
• Single Flash Rotator 75 FPM
• Single Flash Rotator 100 FPM
• Single Flash 120 FPM Phase 1 – Sync*
• Single Flash 120 FPM Phase 2 –Sync*
• Single Flash Rotator 120 FPM
• Single Flash Rotator 150 FPM
• Single Flash 375 FPM Phase 1 – Sync*
• Single Flash 375 FPM Phase 2 – Sync*
• Single Flash Rotator 375 FPM
• Double Flash 75 FPM Phase 1 – Sync*
• Double Flash 75 FPM Phase 2 - Sync*
• Double Flash 130 FPM Phase 1 - Sync*
• Double Flash 130 FPM Phase 2 – Sync*
• Double Flash Rotator 130 FPM
• Triple Flash 130 FPM Phase 1 - Sync*
• Triple Flash 130 FPM Phase 2 - Sync*
• Quad Flash 75 FPM Phase 1 - Sync*
• Quad Flash 75 FPM Phase 2 - Sync*
• Quad Flash Rotator 75 FPM
• ECE R65 Rotator Flash 120 FPM
• ECE R65 Rotator Flash 60 FPM
• CA T13 Single Flash 75 FPM
• CA T13 Double Flash 75 FPM
• NF-Quad Flash 75 FPM
• ModuFlash
• Random
• Steady Burn
* Sync indicates pattern has alternating synchronized function.
* Maximum of 8 units can be linked together.
Flash Pattern Synchronization
• Units on the same ash pattern and phase will ash in synchronous fashion.
• For alternate ashing conguration, set the rst group of units to any Phase 1 pattern. Set the second group of units to Phase 2 of the same ash
pattern as the rst group of units.
Flash Pattern Shortcuts
• Hold ash pattern toggle/cable for 1-3 seconds to toggle previous ash pattern.
• Hold ash pattern toggle/cable for 3-5 seconds to jump to the rst pattern (Single Flash 75 FPM Phase 1).
About Flash Patterns
• All STL LED products are equipped with a non-volatile memory which will recall the last ash pattern when the product is turned on.
• Set the ash pattern by pushing the Flash Pattern button on the Cigarette Lighter Plug to cycle through the various patterns.
• If you are not using the Cigarette Lighter Plug, follow the wiring diagram to identify the Flash Pattern wire to manually cycle through patterns.
All rights reserved. No part of this Instruction Manual may be reproduced, distributed, transmitted, or otherwise shared in any form or by any means, including but not limited to photocopying,
recording, electronic delivery, .PDF reproduction, or any other means of reproducing all or any part hereof without the express prior written consent of SpeedTech Lights, Inc, except for
non-commercial purposes as permitted by United States copyright law. Customers of SpeedTech Lights, Inc, may download and print this Instruction Manual for use with products sold to
the customer by SpeedTech Lights, Inc. However, no part of this Instruction Manual may be otherwise or subsequently reproduced, downloaded, disseminated, published, or transferred,
in any form or by any means, except with the prior written consent of SpeedTech Lights, Inc.