Installation Manual

ManualsBrandsSpeedTech Lights ManualsAutomotiveRaptor-X TIR Interior Upper Windshield Split LED Visor Light Bar for Emergency Vehicle Warning Visor Lights - Amber/Clear Alternating

RAPTOR

VISOR LIGHT BAR

including but not limited to photocopying, recording, electronic delivery, .PDF reproduction, or any other means of reproducing all or any part hereof without

the express prior written consent of SpeedTech Lights, Inc, except for non-commercial purposes as permitted by United States copyright law. Customers

of SpeedTech Lights, Inc, may download and print this Instruction Manual for use with products sold to the customer by SpeedTech Lights, Inc. However,

no part of this Instruction Manual may be otherwise or subsequently reproduced, downloaded, disseminated, published, or transferred, in any form or by

any means, except with the prior written consent of SpeedTech Lights, Inc.

Flash Pattern List

• Steady Burn

• Single Flash Left/Right 180 FPM

• Single Flash 90 FPM

• Single Flash 75 FPM

• Steady Burn Left Side Single Flash Right Side 75 FPM

• Steady Burn Right Side Single Flash Left Side 75 FPM

• Single Flash Left/Right 420 FPM

• Single Flash 420 FPM

• Single Flash 150 FPM

• Variable Speed Left/Right

• Variable Speed

• Left/Right Double Time

• Stacking Left to Right Sweep

• Slow Stacking Right to Left Sweep

• Slow Stacking Center Out Sweep

• Slow Left/Right/Left

• Left/Right/Left

• Stacking Right to Left Sweep

• Stacking Center Out Sweep

• Random

• Triple Flash Left/Right 360 FPM

• Triple Flash 120 FPM

• Quad Flash 150 FPM

Flash Pattern Shortcuts

• Hold ash pattern toggle/cable for 3 seconds to toggle Steady Burn mode.

• Hold ash pattern toggle/cable for 5 seconds to toggle Random pattern mode.

About Flash Patterns

• All STL LED products are equipped with a non-volatile memory which will recall the last ash pattern when the Light Bar is turned on.

• Set the ash pattern by pushing the Flash Pattern button on the Cigarette Lighter Plug to cycle through the various patterns.

• If you are not using the Cigarette Lighter Plug, follow the wiring diagram to identify the Flash Pattern wire to manually cycle through patterns.