Installation Manual

Center Center Passenger SideDriver Side

RAPTOR

VISOR LIGHT BAR

Base Bracket and Vehicle Specic Visor Bracket Assembly

NOTE: This assembly is very similar to the Universal Bracket assembly. The only dierence is the Vehicle

Specic visor brackets will be used instead of the Universal forked visor brackets to pair with the base brackets.

For this example, the 2015+ Dodge Ram Vehicle Specic Brackets (Q-303) will be used.

NOTE: Hardware quantity used will vary based on single or double mounting holes.

1. Take (1) base bracket and the Driver Side Vehicle

Specic visor bracket and overlap the openings. Insert

(1) black Allen screw through visor bracket opening. On

the other end, insert (1) at washer and (1) hex lock nut

to secure both brackets together.

NOTE: Do not fully tighten at this point as adjusting

will need to be done.

2. Repeat Step 1 for the Passenger Side Vehicle

Specic visor bracket and the 2 Center Vehicle Specic

visor brackets. There will be a total of 4 assemblies.