Manualshelf

Installation Manual

ManualsBrandsSpeedTech Lights ManualsAutomotiveRaptor TIR Interior Upper Windshield Split LED Visor Light Bar for Emergency Vehicle Warning Visor Lights - Blue/Amber
12345678910
RAPTOR® SERIES
SpeedTech Lights, Inc © 2018 
Spacer Installation
1. To install spacers (If needed), start by assembling the “Base” bracket with the “Forked” bracket
• Take the both brackets and place them against each other, ensuring that the fork bracket is pointing up
• Next take Qty. 1 - Phillips pan head screws, Qty. 1 - Flat washers and run it through the “Base” bracket, followed by the spacer. Then attach the
“Forked” bracket and hand tighten with Qty. 1 – Flat washer, Qty. 1 – Split Lock washer and Qty. 1 – Hex nut. Repeat steps for the second screw,
the nished assembly should look like this: