Manualshelf

Installation Manual

ManualsBrandsSpeedTech Lights ManualsAutomotiveRaptor TIR Interior Upper Windshield Split LED Visor Light Bar for Emergency Vehicle Warning Visor Lights - Amber/Amber
12345678910
RAPTOR® SERIES
SpeedTech Lights, Inc © 2018
Attaching Assembly to base
1. Notice there are four holes on the bottom of the Raptor, this is where the “Base bracket” will
attach.
• Attach the assembly using the “Base bracket” and Qty. 1 – Phillips pan head screw
• Hand tighten only at this point, with all the assemblies now all in place, adjust both
brackets as need be. Once the exact position for brackets has been determined, remove
the “Base bracket” to tighten the “Fork bracket” and reinstall the “Base bracket” onto
the Raptor body