Installation Manual

RAPTOR® SERIES

Vehicle Specic Bracket Installation

1. To install the vehicle specic brackets the “Base” bracket will need to be attached to the bracket from the vehicle specic bracket

• In this example we will be using the Q-307 2015+ Dodge Ram vehicle specic brackets. Take a “Base” bracket form the universal bracket hard-

ware kit and the “Driver” bracket from the vehicle specic bracket kit. The “Center” brackets will be used on the inner portion of the raptor but

will be the same set up.

• To create the assembly, take the “Driver” bracket and overlap it to the “Base” bracket

• Next take Qty. 1 – Allan screw (black), Qty. 1 – Flat washer (from universal hardware kit) and Qty. 1 – Hex lock nut. Place the Allen screw through

opening followed by the at washer and the hex lock nut