Installation Manual

7 SpeedTech Lights, Inc © 2019
K-FORCE
®
MICRO 50
FULL LIGHT BAR
All rights reserved. No part of this Instruction Manual may be reproduced, distributed, transmitted, or otherwise shared in any form or by any means, including but not limited to photocopying,
recording, electronic delivery, .PDF reproduction, or any other means of reproducing all or any part hereof without the express prior written consent of SpeedTech Lights, Inc, except for
non-commercial purposes as permitted by United States copyright law. Customers of SpeedTech Lights, Inc, may download and print this Instruction Manual for use with products sold to
the customer by SpeedTech Lights, Inc. However, no part of this Instruction Manual may be otherwise or subsequently reproduced, downloaded, disseminated, published, or transferred,
in any form or by any means, except with the prior written consent of SpeedTech Lights, Inc.
Flash Pattern List
Steady Burn
Single Flash 75 FPM
Single Flash 240 FPM
Quad Flash 120 FPM
Quint Flash Inside/Outside
Quint Flash Outside In
Quint Flash Outside/Inside/Outside
Accelerating Single Flash Left/Right
Accelerating Single Flash Outside/Inside/Outside
Accelerating Single Flash Alternating
Accelerating Single Flash 2x Alternating
Accelerating Single Flash
Stacking Outside In
Stacking Inside Out
Stacking Inside Out/Outside In
Pulse Left to Right Sweep
Pulse Right to Left Sweep
Random
Clockwise Sweep
Counter Clockwise Sweep
Fast Clockwise Sweep
Fast Counter Clockwise Sweep
Clockwise Sweep 2 LED
Counter Clockwise Sweep 2 LED
Fast Clockwise Sweep 2 LED
Fast Counter Clockwise Sweep 2 LED
Stacking Left to Right Sweep
Stacking Right to Left Sweep
Stacking Right to Left/Left to Right Sweep
Steady Burn Left Side Only
Steady Burn Right Side Only
Single Flash Left Side Only
Single Flash Right Side Only
Pulse Left Side Only
Pulse Right Side Only
Steady Burn Left Side. Single Flash Right Side 120 FPM
Steady Burn Right Side. Single Flash Left Side 120 FPM
Steady Burn Left Side. Pulse Right Side
Steady Burn Right Side. Pulse Left Side
Single Flash Left/Right 120 FPM
Quad Flash Left/Right 120 FPM
Quint Flash Alternating
Quint Flash 2x Alternating
Pulse Alternating
Pulse 2x Alternating
Flash Pattern Shortcuts
Hold ash pattern toggle/cable for 3 seconds to toggle Steady Burn mode.
Hold ash pattern toggle/cable for 5 seconds to toggle Random pattern mode.
About Flash Patterns
All STL LED products are equipped with a non-volatile memory which will recall the last ash pattern when the Light Bar is turned on.
Set the ash pattern by pushing the Flash Pattern button on the Supreme Control Box to cycle through the various patterns.
If you are not using the Supreme Control Box, follow the wiring diagram to identify the Flash Pattern wire to manually cycle through patterns.