VIREO ® SIREN S-VR100 INSTRUCTION MANUAL 1 SpeedTech Lights, Inc © 2019
VIREO ® SIREN Warnings and Notices for Users and Installers This document must be delivered to and read by the end user and installer as it serves to provide you with the required information for proper and safe use of your STL product. Before operating this or any STL products the user and installer must read this manual all the way through. You will find important information in this manual that could prevent property damage and/or serious injury to the user and installer.
VIREO ® SIREN Important Points for Your Safety and Longevity of Your Light Bar • • • • • • • • • • • • • • • Installers are required to have a good understanding of automotive electronic systems and procedures for proper installation. Never stare directly into the LEDs as momentary blindness and/or eye damage may occur. Never take any lights through a car wash. Use only water to clean the outer body/lens of your equipment. Never use a pressure washer to clean any STL products.
VIREO ® SIREN Wiring Harness Diagram Wire Color Function AUX Lighting Wiring Diagram Wire Color Function Red* Positive Red* Positive Black* Negative Red* Positive Brown Primary Speaker Brown Cable 1 Brown Primary Speaker Blue Cable 2 White Cable 3 Green Cable 4 Orange Cable 5 Radio Rebroadcast Grey * Indicates a main power cable. Yellow Cable 6 NOTE: All AUX lighting cables contact +12 VDC.
VIREO ® SIREN Programming Manual Function • • The Manual button can be programmed to operate any Siren Tone while the Manual button is pressed. To program, press the desired Siren Tone button and Manual button together. NOTE: The Manual button only operates the programmed Siren Tone while no other Siren Tone buttons are active. Manual Function Additional Feature • • • Wail and Mech Siren Tones have an additional feature with the Manual button.
