SDS

Page 6 of 20 Created 11/22/2016
SAFETY DATA SHEET
XIAMETER(R) SLT-7001 SEALANT OXIME
CLEAR-M
Version
3.0
Revision Date:
04/25/2016
SDS Number:
702926-00005
Date of last issue: 10/01/2015
Date of first issue: 11/03/2014
5 / 19
Hazardous components without workplace control parameters
Ingredients
CAS-No.
Methyltri(ethylmethylketoxime)
silane
22984-54-9
Vinyltri (methylethylketoxime)
silane
2224-33-1
N-(3-
(Trimethoxysilyl)propyl)ethylen
ediamine
1760-24-3
Methyltri(ethylmethylketoxime)
silane isomers and oligomers
Not Assigned
Occupational exposure limits of decomposition products
Ingredients
CAS-No.
Value type
(Form of
exposure)
Control parame-
ters / Permissible
concentration
Basis
Ethyl methyl ketoxime
96-29-7
TWA
10 ppm
US WEEL
Engineering measures
:
Processing may form hazardous compounds (see section
10).
Ensure adequate ventilation, especially in confined areas.
Minimize workplace exposure concentrations.
Personal protective equipment
Respiratory protection
:
General and local exhaust ventilation is recommended to
maintain vapor exposures below recommended limits. Where
concentrations are above recommended limits or are
unknown, appropriate respiratory protection should be worn.
Follow OSHA respirator regulations (29 CFR 1910.134) and
use NIOSH/MSHA approved respirators. Protection provided
by air purifying respirators against exposure to any
hazardous chemical is limited. Use a positive pressure air
supplied respirator if there is any potential for uncontrolled
release, exposure levels are unknown, or any other
circumstance where air purifying respirators may not provide
adequate protection.
Hand protection
Material
:
Chemical-resistant gloves
Remarks
:
Choose gloves to protect hands against chemicals depending
on the concentration specific to place of work. Breakthrough
time is not determined for the product. Change gloves often!
For special applications, we recommend clarifying the
resistance to chemicals of the aforementioned protective
gloves with the glove manufacturer. Wash hands before
breaks and at the end of workday.
Eye protection
:
Wear the following personal protective equipment:
Safety goggles
Skin and body protection
:
Select appropriate protective clothing based on chemical