SDS

Page 4 of 20 Created 11/22/2016
SAFETY DATA SHEET
XIAMETER(R) SLT-7001 SEALANT OXIME
CLEAR-M
Version
3.0
Revision Date:
04/25/2016
SDS Number:
702926-00005
Date of last issue: 10/01/2015
Date of first issue: 11/03/2014
3 / 19
Most important symptoms
and effects, both acute and
delayed
:
May cause an allergic skin reaction.
May cause damage to organs through prolonged or repeated
exposure if swallowed.
Protection of first-aiders
:
First Aid responders should pay attention to self-protection,
and use the recommended personal protective equipment
when the potential for exposure exists.
Notes to physician
:
Treat symptomatically and supportively.
SECTION 5. FIRE-FIGHTING MEASURES
Suitable extinguishing media
:
Water spray
Alcohol-resistant foam
Carbon dioxide (CO2)
Dry chemical
Unsuitable extinguishing
media
:
None known.
Specific hazards during fire
fighting
:
Exposure to combustion products may be a hazard to health.
Hazardous combustion prod-
ucts
:
Carbon oxides
Silicon oxides
Formaldehyde
Nitrogen oxides (NOx)
Specific extinguishing meth-
ods
:
Use extinguishing measures that are appropriate to local cir-
cumstances and the surrounding environment.
Use water spray to cool unopened containers.
Remove undamaged containers from fire area if it is safe to do
so.
Evacuate area.
Special protective equipment
for fire-fighters
:
In the event of fire, wear self-contained breathing apparatus.
Use personal protective equipment.
SECTION 6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protec-
tive equipment and emer-
gency procedures
:
Use personal protective equipment.
Follow safe handling advice and personal protective
equipment recommendations.
Environmental precautions
:
Discharge into the environment must be avoided.
Prevent further leakage or spillage if safe to do so.
Retain and dispose of contaminated wash water.
Local authorities should be advised if significant spillages
cannot be contained.
Methods and materials for
:
Soak up with inert absorbent material.