User`s guide

Table mounting

1. Fix the table clamp to the underside of the steering wheel (see picture be

low).

2. Place the steering wheel on the table and turn the table clamp screw suf-

ciently tight enough so that the steering wheel cannot slip.

Thigh support

1. Unpack the thigh supports.

2. Turn the steering wheel upside down and fasten the supports in the holes

provided.

3. Place the steering wheel on your thighs as shown in the picture.

Connecting to a games console or PC

Connecting to PlayStation

Note: Do not connect the steering wheel to the PlayStation

2 using the USB

connector on the cable! It will only work with the PlayStation

2 when you use

the steering wheel’s PlayStation

2 connector.

1. Switch off your PlayStation

2 games console.

2. Connect the PlayStation

2 plug on your steering wheel to Port 1 on your

PlayStation

2 console.

3. Connect the pedal block to the 6-pin cable of the steering wheel.

4. Switch on the TV and games console.

Note:

For automatic detection of the steering wheel, DO NOT touch the steering

wheel! The steering wheel congures itself automatically.

Connecting to a PC via the USB port

Note:

1. USB operation is not supported by Windows

95/NT.

2. Do not connect the steering wheel to a USB hub. It will only work when con-

nected directly to the USB port of your PC.

System requirements:

• IBM PC

• Windows

98 or higher

• Free USB port

• 20 MB free hard disk space

Connect the USB connector to the USB port on your PC.