Instructions / Assembly

Saddle Installation Manual
!
!
!
45 Degree and 90 Degree Saddle Take Off for Round Duct
Cut the appropriate size hole in the round duct pipe you are installing onto.
• Cut the appropriate size hole in the round duct pipe you are installing onto.
• If your saddle has an adhesive gasket remove the paper tape prior to installation.
• Place the saddle onto the round duct pipe being sure to orient the direction of the saddle and/or any damper control.
• Secure with sheet metal screws (not provided) in the mounting holes on the flange.
45 Degree Saddle 90 Degree Saddle