Technical Specifications

Energy Ecient, Self-Sealing Start Collar
Speedi-Boot™ plastic take o collar has revolutionized the
HVAC industry! Speedi-Collar was specically
designed to attach in seconds, eliminate installer injury
and seal air tight.
The Speedi-Collar Advantage
• INSTALLS FASTER - Pre-Install Flex or Metal Duct!
• REDUCES INJURY - No tabs to bend back.
• SEALS TIGHTER - Greatly minimize air/energy loss.
• 2-SIDED GASKET - Reduces extra sealant costs.
• GREEN building product.
• FIRE RATED for use in a plenum UL2043.
• 157 times LESS CONDUCTIVE than metal.
• COST EFFECTIVE alternative.
• REPLACES tab AND stick-on metal collars.
Speedi-Collar VS. Metal
Duct Board
Trunkline
Sheet Metal
Trunkline
Pre-Install Flex Duct
(for faster installation)
Available in: 5”, 6”, 7”, 8”,
10” and 12” sizes
dampered and
damperless models.
www.speediboot.com
MADE IN U.S.A.
• No sharp edges
• Dent proof
• Lightweight
• Rust proof
ONE COLLAR
The Speedi-Collar can be used with 1”, 1-1/2”, 2” duct board
and sheet metal trunk lines, and is sized for metal pipe and
exible ducting.
COLLAR