User Guide

© 2018 All Rights Reserved.
5
General Maintenance
and Storage
CoilShot
®
MIXING VALVE CHART
Dial Setting
Estimated Dissolve
Time CoilShot
®
Estimated Dissolve
Time CoilShot
®
-HD
Full Open 7 minutes 9 minutes
¾ 10 minutes 30 minutes
½ 14 minutes 45+ minutes
¼ 28 minutes 60+ minutes
FULL OPEN
¾
½
¼
Note: once the tablet comes in contact with the water, it will start to dissolve.
1. When done using the unit, run clean water through it to remove any chemical residue.
2. Protect unit from freezing temperatures. Do not store unit outdoors.
3. Before storing, remove all water from inside the gun. Do this by disconnecting the water
source, squeezing the trigger, and shaking the water out of it.
NOTE: When storing after use with CoilShot
®
-HD, rinse the gun with clean water for at least
2 minutes before storing.
Troubleshooting
ISSUE PROBABLE CAUSE
Water is not coming out • Make sure the garden hose is connected and water is turned on
and flows freely from the hose.
• Trigger is damaged and will not activate.
Water is leaking from the
back of the gun
• O-ring in the door is broken or missing and needs to be replaced.
• Latch is broken or worn.
Water leaks from
the nozzle
• The O-ring in the tip of the gun is broken and should be replaced.
• The trigger valve O-ring is damaged.
Nozzle will not secure to
the tip of the gun
• The quick disconnect is worn and needs to be replaced.
Chemical is not
coming out
• The mixing valve is closed and needs to be opened.
• The tablet has dissolved completely and needs to be replaced.
Water leaks at the
hose connection
• The hose connector is damaged.
• The water seal is damaged.
COILSHOT
®
Maximum Input Pressure Up to 70 PSI @ 3.0 GPM
Hose Type Garden Hose
Dimensions 10” x 8” x 2.25”
Weight 1 lb.
Specifications