Installation Instructions

Figure 44
Start Dryer
Nonmetered Models
1. Rotate timer knob to desired time setting (up to 60 minutes).
2. Press the PUSH-TO-START button. IN USE light will come
on (indicating start of cycle).
Figure 45
Coin Slide Models
1. Place coin(s) in slide and carefully push in as far as possible
and then pull slide out as far as possible.
2. After IN USE light comes on (indicating start of cycle), press
the PUSH-TO-START button.
D363I_SVG
Figure 46
3. Remove knits when slightly damp because overdyring may
cause shrinkage. Do not tumble dry knit woolens.
Should dryer stop before cycle is completed, the motor overload
protector may have cycled. Refer to Maintenance section.
NOTE: This machine includes an extended tumble fea-
ture. Starting 20 minutes after a cycle ends, the cylin-
der will tumble for two minutes every hour without
heat, up to 18 hours or until door is opened.
Operation Instructions for MDC Dryers
WARNING
To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUC-
TIONS before operating this appliance.
W727
IMPORTANT: Remove all objects from pockets such as
lighters and matches.
This appliance shall not be used to dry off solvents or dry clean-
ing fluids.
IMPORTANT: Before using dryer for the first time, use
an all-purpose cleaner, or a detergent and water solu-
tion, and a damp cloth to remove shipping dust from
inside of dryer drum.
IMPORTANT: Remove all sharp objects from laundry to
avoid tears and rips to items during normal machine
operation.
Clean Lint Filter
Clean lint filter before each use.
D608I_SVG
Figure 47
Load Laundry
1. Load clothes loosely into dryer drum (18.0 lbs. [8.2 Kg] max-
imum dry clothes load).
2. Add fabric softener sheet if desired.
Operation
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
40
Part No. D516906ENR1