Installation Instructions

8. Using screwdriver, remove two door plugs, and reinstall on

opposite side of door opening.

D317S_SVG

Figure 28

9. Reinstall four hinge attaching screws, removed in Step 1.

D606I_SVG

Figure 29

Wipe Out Inside of Dryer

Before using dryer for the first time, use an all-purpose clean-

er, or a detergent and water solution, and a damp cloth to re-

move shipping dust from inside dryer drum.

Figure 30

Plug In the Dryer

This appliance is to be supplied through a residual current device

(RCD) having a rated residual operating current not exceeding 30

mA.

Electric Dryer

Connect the dryer to an electrical power source. Refer to Connect

Electrical Plug section for information on connecting power cord.

Connect to 30 Amp Circuit

D275I_SVG2

Figure 31

Gas Dryer

Dryer requires 120 Volt, 60 Hertz electrical supply and comes

equipped with a 3-prong earth/ground plug. Refer to serial plate

for specific electrical requirements.

NOTE: The wiring diagram is located behind the con-

trol panel, inside the control cabinet.

Installation

DO NOT COPY or TRANSMIT

Part No. D516906ENR1