User's Guide for Dryers DRY725C_SVG Original Instructions Keep These Instructions for Future Reference. CAUTION: Read the instructions before using the machine. (If this machine changes ownership, this manual must accompany machine.) www.alliancelaundry.com Part No.
WARNING IMPORTANT: Purchaser must consult the local gas supplier for suggested instructions to be followed if the dryer user smells gas. The gas utility instructions plus the SAFETY and WARNING note directly above must be posted in a prominent location near the dryer for customer use. WARNING Risk of fire. Highly flammable material. WARNING W881 • Installation of unit must be performed by a qualified installer. • Install clothes dryer according to manufacturer’s instructions and local codes.
The following information applies to the state of Massachusetts, USA. • • • • This appliance can only be installed by a Massachusetts licensed plumber or gas fitter. This appliance must be installed with a 36 inch [910 mm] long flexible gas connector. A “T-Handle” type gas shut-off valve must be installed in the gas supply line to this appliance. This appliance must not be installed in a bedroom or bathroom. © Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT 4 Part No.
Table of Contents Safety Information............................................................................. 6 Explanation of Safety Messages................................................................. 6 Important Safety Instructions....................................................................6 Before Drying.................................................................................... 8 Energy Saving Tips................................................................................
Safety Information Safety Information Explanation of Safety Messages • Precautionary statements (“DANGER,” “WARNING,” and “CAUTION”), followed by specific instructions, are found in this manual and on machine decals. These precautions are intended for the personal safety of the operator, user, servicer, and those maintaining the machine. • DANGER • Indicates an imminently hazardous situation that, if not avoided, will cause severe personal injury or death.
Safety Information • • • • • • • • • • • • Always contact your dealer, distributor, service agent or the manufacturer about any problems or conditions you do not understand. ment manufacturer and only use the dryer drum to dry textiles that have been washed in water. Always read and follow manufacturer’s instructions on packages of laundry and cleaning aids. Heed all warnings or precautions.
Before Drying Before Drying Energy Saving Tips • • • • • • • • • • 2. Separate lint shedding fabrics and lint receiving fabrics. Towels, flannels, chenille, cottons, rugs, etc., shed lint. Corduroys, knits (including socks), permanent press, and synthetics attract lint. 3. Separate no heat, low heat and high heat items. Make sure the lint filter is always clean. Do not overload the dryer. Do not overdry items. Remove items to be ironed while still damp.
Before Drying Cylinder with wet linens and cottons DRY2031N_SVG Cylinder with wet permanent press items DRY2032N_SVG © Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT 9 Part No.
Operating Your Dryer Operating Your Dryer WARNING To reduce the risk of fire, electric shock, serious injury or death to persons, read the Safety Information section before operating the dryer.
Operating Your Dryer digital display. The cycle time can be increased or decreased using the up and down arrow keypads. The time and temperature selection may be adjusted manually at any time before or during the cycle. Selections The following selections can be used to modify the currently chosen cycle. The default selections will be lit after choosing a cycle. Temp Press the Temp keypad to change a Manual cycle’s temperature. Choose from No Heat, Low or High.
Operating Your Dryer 5. If not already on (control lights will be lit), turn on the dryer by pressing the Power/Cancel button. 1 NOTE: You will not be able to press the Start/Pause button to Pause the cycle until the motor is running. If the Start/Pause button is pressed while attempting to run the motor (during the warm-up period), an invalid keypress tone will sound. 6. Select the Cycle and, if desired, change the Selections and Options settings.
Maintenance Maintenance Lubrication WARNING All moving parts are sealed in a permanent supply of lubricant or are equipped with oilless bearings. Additional lubrication will not be necessary. Any disassembly requiring the use of tools must be performed by a suitably qualified service person. Care of Your Dryer W299 WARNING To reduce the risk of an electric shock, serious injury or death, disconnect the electrical service to the dryer before cleaning the interior.
Maintenance Lint Filter The lint filter is located at the front of the dryer in the lower part of the door opening. CLEAN THE LINT FILTER BEFORE DRYING EACH LOAD. Annually remove lint filter and screw to vacuum the duct under it. 1 DRY2757N_SVG 1. Lint Filter Figure 2 © Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT 14 Part No.
Troubleshooting Troubleshooting Try these troubleshooting tips before making a service call. They may save you time and money. Dryer Symptom Dryer won’t start Possible Cause/Solution • • • • • • Dryer won’t heat • • • • • Dryer doesn’t dry clothes satisfactorily • • • • • • • • Make sure the power cord is plugged all the way into the electrical outlet. Make sure loading door is closed. Press Start/Pause button to start dryer.
Troubleshooting Dryer Symptom Dryer is noisy Possible Cause/Solution • • • Check dryer for foreign objects (nails, coins, bobby pins, metal, plastic toys, etc.). Remove items from dryer. Make sure dryer is level. Uneven leveling can cause vibration. Normal operating sounds include the heat source going on and off and the humming of air moving through the dryer and exhaust system. Clothes are too wrinkled • • Check heat setting. Overdrying can cause wrinkling. Check load size.
Troubleshooting Contact Information Alliance Laundry Systems Shepard Street P.O. Box 990 Ripon, Wisconsin 54971-0990 www.alliancelaundry.com Phone: +1 (920)748-3121 If service is required, contact the nearest Factory Authorized Service Center. If you are unable to locate an authorized service center or are unsatisfied with the service performed on your unit, contact: Date Purchased Model Number Serial Number 1 DRY2030N_SVG 1.
