Washer Owner's Manual

Washer Symptom Possible/Cause Solution
Er, SL on digital display
• This code will be displayed after a cycle for one minute, or
until the Power/Cancel keypad is pressed, and indicates
an oversudsing condition.
• Laundry load may be oversudsing. Make sure you are us-
ing low sudsing, high efficiency (HE) detergent. If using
non-HE detergent, use only 1/2 of the detergent manufac-
turer's recommended amount.
• Laundry load may be overloaded. Make sure you are using
proper load sizes.
Sr, cycle time remaining on digital display
• The control has detected an oversudsing condition and is
running a special routine to remove the excess suds.
Troubleshooting
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
33 Part No. 807493ENR1